Clutch & Gearbox Tools

Dual Mass Flywheel “ Special Tool Developed in conjunction with LUK, to allow accurate testing of the Dual Mass Flywheels (DMF) unit, whilst it is still mounted on the vehicle, with the gear box removed DMF units are designed to dampen out unwanted engine vibration, particularly important on modern high speed diesel engines By dampening unwanted vibration, engine and transmission components can be made lighter, in order to maximise the higher power outputs available from the modern diesel engine DMF units are designed to last the life of 2 clutch units, assuming correct vehicle usage and normal load conditions Includes all the components required to test the DMF including the LUK specific DMF data, instructional CD and Data Wheel which are vital to the correct operation of the kit The Data Wheel, provides the specific data, per application, to allow the technician to correctly evaluate the DMF Spare Parts: 081100-01 - Slotted Bar 081100-02 - Ring Gear Locking Dogs 081100-03 - Ring Gear Locking Dogs Spacers 081100-04 - Adaptors & Nuts Set 081100-05 - Degree Gauge 081100-06 - Degree Gauge Locking Bar 081100-07 - DTI Gauge & Stand  

Read more less

08550300 - GM Gearbox Bearing / Race Remover Specialist puller designed for the removal of taper bearing cups from clutch housings in M32, MT20-6 and MT32-6 manual gearboxes. Engineered to apply even force, reducing the risk of damage to the gearbox casing during removal. Key Features Designed for removal of taper bearing cups in specific GM gearboxes Suitable for M32, MT20-6 and MT32-6 transmissions Even load distribution prevents casing damage or cracking Provides controlled, safe extraction of bearing races Widely used across GM, Saab and Fiat group vehicles Robust construction for professional workshop use Applications Widely used in GM, Saab and Fiat Group

Read more less

08550500 - Fifth Gear Puller Ford A specialist tool designed for the fast and efficient removal of the fifth gear on Ford front-wheel drive transmissions, ideal for use prior to internal gearbox repairs. Engineered for precision and safety, this puller features a split collar and retaining sleeve to ensure secure positioning during operation, reducing the risk of damage and improving workshop efficiency. Key Features Fast and simple removal of fifth gear components Designed specifically for Ford FWD transmissions Split collar and retaining sleeve for secure, positive location Applications B5 gearboxes (pre-1995, 5-speed manual) IB5 gearboxes (1995 onwards – Fiesta, Ka, Focus) MTX-75 (Focus, Mondeo, Jaguar X-Type, C-Max) VXT-75 (Galaxy, Transit FWD, Transit Connect)

Read more less

GO900 - Self Adjusting Clutch (SAC) Installer Master Kit Designed for safe, accurate installation of self-adjusting clutches, the GO900 helps prevent unwanted movement of the clutch adjustment ring during fitting. This reduces the risk of incorrect adjustment and supports smooth clutch operation after installation. The kit includes both 3-arm and 4-arm support trusses, making it suitable for flywheels with six or eight mounting screws. Key features 14-piece specialist centring tool set For vehicles without crankshaft pilot bearings Helps install self-adjusting clutches correctly Prevents erratic adjustment of the clutch mechanism Supports smooth and reliable clutch operation Includes 3-arm truss for 6-bolt flywheels Includes 4-arm truss for 8-bolt flywheels Ideal for Professional workshops working on SAC clutch replacement, clutch alignment and gearbox service applications. Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO901 - Self Adjusting Clutch (SAC) Installer Kit Professional tool kit for the removal and installation of self-adjusting clutch (SAC) assemblies. The GO901 is designed to safely and accurately dismount and refit SAC clutch assemblies to the flywheel using the approved clutch manufacturer method. It ensures correct pre-tensioning of the pressure plate, helping to avoid common installation errors that can lead to clutch damage or reduced service life. Suitable for a wide range of vehicles, this kit supports efficient, reliable clutch servicing in professional workshop environments. Key features Designed for removal and installation of SAC clutch assemblies Uses the manufacturer-approved installation method Enables pre-tensioning of the pressure plate before removal and refitting Prevents clutch plate distortion and accidental damage during installation Reduces risk of vibration and premature clutch wear Covers 120° (3-screw) SAC clutch assemblies Applications include Alfa Romeo, Audi, BMW, Fiat, Ford, Mercedes, VW and more Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO903 - DSG Clutch Removal Kit VW Group RRP £616.97 The tool set for the disassembly and assembly of the DSG (Direct-Shift Gearbox) is designed to remove the clutch casing, including the discs, of 6-speed (code 08D) and 7-speed (code 0AM) VAG gearboxes, dual clutches (K1 and K2) and multiple shafts used in cars of the VAG Group from 2004 to 2012. Includes pliers to remove/install the main shaft safety ring. AUDI applicationModels: A3 SEAT applicationModels: Altea, Altea XL, Ibiza, Leon, ToldeoSKODA applicationModels: Fabia, Octavia, Roomster, Superb, YetiVW applicationModels: Golf, Golf Plus, Jetta, Passat, Polo, Scirocco, Touran   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Replacement beam For 08550300 GM Gearbox Bearing / Race Remover

Read more less

GO640 - Engine and Gearbox Underbody Support - 240KG The GO640 is designed to safely support engines or gearboxes during essential maintenance, particularly when front end components such as engine mounts, subframes or suspension units are removed. With a strong 240 kg capacity and versatile adjustable design, this support tool is ideal for a wide range of engine and transmission configurations. Key Features: Heavy Duty Capacity: Supports up to 240 kg, making it suitable for most passenger vehicles and light commercials. Fully Adjustable: Extendable arms and adjustable supports allow for a secure fit across a wide variety of engine bays. Robust Construction: Durable steel frame with rubber coated mounting feet ensures stability without damaging vehicle surfaces. Improved Access: Frees up working space by supporting the engine from above, essential when working on subframes, clutches or transmissions. Quick Setup: Easy to install and adjust for both professional workshops and mobile technicians. A must have for any technician carrying out engine or gearbox work, especially where under vehicle support is restricted. Technical data: Telescopic arm: to 230 mm Load capacity: 240 kg Sliding telescopic arm extension: min. 657/max 887 Side-arms extension: min. 322/max 566. Full range of Govoni available click to see the  Govoni Catalogues

Read more less

GO925 - Gearbox & Automatic Transmission Support 150Kg The GO925 is designed to provide a secure, stable hold when working on gearboxes, automatic transmissions, DSG units and differential assemblies. With fully adjustable support arms and controlled tilt movement, it allows technicians to position components accurately while maintaining complete control throughout the job. Key features 150kg load capacity suitable for gearboxes, DSGs and differential units Adjustable front and rear support arms for a secure, tailored fit Variable tilt control: Forward/backward: ±35° Left/right: ±5° Allows precise positioning during installation and removal Maintains a stable grip throughout movement Includes 30mm adaptor for transmission stand piston rod  Specifications: Weight: 12 kg Max. load bearing capacity: 150 kg Length/width: 490 mm/460 mm Assembly:  40 mm Forwards/backwards tilt: ±35° Left/right tilt: ±5° Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less